aFe BladeRunner Turbocharger - 1994-2002-Dodge 5.9L Cummins Diesel Trucks - 46-60061

aFe BladeRunner Turbocharger
1994-2002-Dodge 5.9L Cummins Diesel Trucks - 46-60061

A true direct replacement turbo, this aFe BladeRunner turbocharger supports up to 500HP while lowering Exhaust Gas Temperatures (E.G.T.).

Turbine: High silicone ductile iron casting with internal wastegate. To lower Exhaust Gas Temperatures (EGT's), the turbine outlet is 4.0" compared to the OE 3.0" outlet. The CNC machined wastegate actuator is set to 40 PSI. The inducer and exducer measure 74mm and 64mm respectively.

Compressor: The housing is cast from A356 T6 aluminum and incorporates a ported shroud to eliminate turbo bark and compressor surge. The wastegate actuator mounts to a bracket cast into the housing. The inducer and exducer measure 58mm and 76mm respectively.

Direct Replacement: A cast ductile iron turbine outlet allows this turbo to fit both the 12V and early 24V engines with no modifications. The turbine outlet is machined to accept an EGT thermocouple to monitor temperatures. All necessary gaskets and clamps are included for a trouble free installation.

Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws. Visit http://afepower.com/DPF/release.pdf for the release of liability form.